Hydra-Stop IPV 250 Valve

Hydra-Stop IPV 250 Valves provide municipalities and private water utilities with efficient, safe and cost-effective solutions to save water.

An alternative to the Team InsertValve, especially on pipes that cannot be mechanically restrained, such as asbestos cement. Allows for operating pressures up to 250 psi.

Download Spec Sheet


Insta-Valve 250 Equipment

This equipment is used to install the 4- to 12-inch Insta-Valve 250 Patriot insertion valve.

16″ IVP 250 Equipment

This is designed for installation of the 16-inch IVP 250 insertion valve.


The low-cost, lightweight Hydra-Stopper isolates the point of repair, maintenance or replacement for valves and hydrants in just minutes. It can be used accurately and reliably on any common pipe material, including steel, cast iron, ductile iron, asbestos cement, concrete and PVC.


Hydra-Stop’s lightweight tapping machine makes line taps on water and wastewater lines without difficulty.


The Hydra-Power hydraulic power pack is lightweight yet rugged. The large oil reservoir keeps things cool, even when powering through a lengthy tap.


With this sampling kit, you can accurately ascertain the pipe’s inner diameter. This equipment provides the data necessary for determining the best cutter and cartridge combination for your application.


Designed to save time and create a safer environment, our Quick Install Kit decreases IV 250 Patriot installation time by up to 25 percent.


Pipeline Assessment Solution which works in conjunction with the Insta-Valve 250 Patriot insertion valve. System Assessment combined with System Control

Key Features:

  • Improve Safety
  • Complete Projects on Time & Budget
  • Avoid Social Media Fallout
  • Preserve the environment
  • Reduce Operating Costs
  • Provide System Control

Pipe Applications:

  • Potable Water
  • Sewage
  • Raw Water
  • reclaimed Water
  • Irrigation
  • Backflow Control Systems


Maximum height of the valve from the center of the host pipe to the top of the operating nut shall not exceed the following dimensions:

  • 4” = 18.6”
  • 6” = 21.5”
  • 8” = 24.6”

Maximum laying length of the valve body shall exceed the following dimensions:

  • 4” = 12”
  • 6” = 12”
  • 8” = 16”

Maximum weight of the valve shall not exceed the following weight:

  • 4” = 138 lbs.
  • 6” = 173 lbs.
  • 8” = 229 lbs.