JCM 422 Tapping Sleeve for PVC and Steel Pipes
CM 422 Fabricated Tapping Sleeve for PVC and Steel Pipe
Built-in benefits make JCM 422 Tapping Sleeve the ideal selection for tapping and branching IPS sized PVC, Steel, High Density Polyethylene Pipe and C-900 PVC.
Exact fit of these sleeves provide reinforcement which strengthens the PVC pipe and prevents pipe stress at the branch.
JCM 422 Fabricated Tapping Sleeve for PVC and Steel Pipe
Body: ASTM 285 Grade C, ASTM A-36 Steel or equal.
Bolts: 5/8” Corrosion resistant, high strength low alloy oval neck track head bolt per ASTM A242/ANSI 21.11/AWWA C-111 and heavy hex nut per A563 epoxy coated, Powercron 590-534. Optional: Stainless Steel 18-8 304 or 316 available.
Flange: AWWA C207 Class D, ANSI 150 lb. Drilling, recessed for tapping valve MSSSP60.
Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydro mechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40°F to 212°F (-40°C – 100°C) Gasket suitable for water, salt solutions, mild acids, bases, and sewage.
Finish: Fusion applied epoxy coating, minimum 12 mils thickness per ANSI/AWWA C213.
Service Rating: 4″ to 12″ Outlets: 175 psi. Higher service rating available for specific applications and sizes.